USB Flash drive or Pendrives are the easiest way to carry and transfer any type of data like image, documents, musics, movies etc from one computer to another, higher capacity of flash drive are also used for data storage. Flash drives are very useful in Windows Installation and certain troubleshooting. However some times it give you error while transferring data from computer to USB flash drive that “The disk is write protected, remove the write protection or use another disk”, this error generates because Write protection to your USB flash drive is enabled and you cannot transfer any data to flash drive and can’t delete data from flash drive, however you can copy data from flash drive to your computer. Write protection to flash drive is sometime useful, lets you have some important data then enable write protection and prevent from accidental deletion or format, also it is not easy to delete data for non tech person.
So enabling and disabling write protection is good thing you should know to keep your data secure, sometime due to virus and malware it automatically becomes Write Protected in such case you can disable write protection using below technique.
Disable Write Protection to USB Flash Drive.
Usually people face Write protection as problem, since they are unable to copy data to flash drive so this is a big issue, many people throw their flash drive assuming that it is useless now, so here are simple steps by which you can disable Write protection from usb drive using command prompt.
1. Insert your flash drive, Go to Start and search for cmd right click on it and “run as administrator” or windows 8, 8.1 user press Start button + X and select Command Prompt (Admin).
2. Once command prompt is open, type diskpart and hit Enter, it will give you access to manage disk partition.
3. Type list disk and hit Enter, it will show you all connected disk to your computer, like disk 0, disk 1 along with their storage capacity.
4. Recognise your flash drive by its storage capacity like mine is 16 GB ( As per Manufacturer) which is showing here 14 GB (Actual Size) as Disk 1 or remove all other external drive except your Flash Drive, then you will get as above and Disk 1 is going to be your Flash drive.
5. Now type Select Disk # ( Select disk disk no. ) as in above case i need to type Select disk 1 and hit Enter. It will select disk 1 and any further command will apply on disk 1.
6. Now you need to check if your flash drive is Write protected, just type attributes disk and hit enter, it will show you current status of disk protection.
as in above image it shows that disk is write protected.
7. Now, to disable write protection from flash drive type attributes disk clear readonly and hit enter.
After executing above command your flash drive will not be write protected any-more, you can copy and delete data from your flash drive as usual.
Enable Write Protection to Flash Drive
Lets say in any case you want to protect your data from deletion or formatting flash drive then you can enable write protection which will help you to secure your data in flash drive.
To enable write protection follow step 1-6 and then type attributes disk set readonly and hit enter.
This will set your flash drive in Read Only mode i,e write protected.
All above steps to enable and disable write protection applies on USB flash drive, Micro SD Cards, and any other removable storage device, in case if you have Camera Memory card then first you need to check the lock button on the side of memory card if it is write protected then flip the lock switch on other side (Up Down) it will disable write protection from Camera Memory card, or if you are using memory card holder for SD Cards.
Also you can follow above steps if lock button does not work or broken.
If you want to buy a USB 3.0 Flash drive for faster read and write operation then here is my recommendation for you, this flash drive and its performance is tested by me. Buy Faster USB 3.0 Flash Drive from Amazon (affiliate link) which has transfer speed up to 225 MB/s.
0 comments: